The store will not work correctly in the case when cookies are disabled.
ACV Heatmaster 25C Condensing Boiler XB600001
Overview
ACV Heatmaster 25C - A1002322 XB600001
HeatMaster 25 C
Combined gas fired condensing boiler and water heater with stainless steel heat exchanger
- 10 -Year Heat Exchanger Warranty
- Tank-in-Tank
- BIM Objects
- Nat Gas and LPG
- Domestic and Commercial
- GAS
- BOILERS
- DHW PRODUCTION
- STANDARD
- CONCENTRIC
- FLOOR INSTALLATION
# GTIN : 5400891032206
# P/N : XB600002
ACV Heatmaster 25C - A1002322 XB600001
- Heating and hot water from one unit saves space, reduces energy use and speeds up installation
- Operates in most efficient mode (condensing) for heating
- Low maintenance with no anode protection required
- Easy to use standardised controls using ACVMax control system
- Low NOx levels – this model qualifies for 2 credits under BREEAM New Construction 2018 (<24mg/kWhr)
- Suited to smaller premises and lower flow rate requirements (smaller DHW tank than 25TC)
- Corrosion-resistant stainless steel heat exchanger backed by a 10-year warranty reduces maintenance and increases system lifespan
- Long life – 25-year guarantee on the corrosion resistant stainless steel cylinder
- Suitable for unvented systems – supplied with 3.5 bar mains unvented kit and DHW mixing valve
- Supplied with LPG kit for on-site conversion
- Reduces legionella risk due to temperature stored at > 60°C
More Information
EAN Code |
5400891032206 |
|
|
HeatMaster 25 C |
Capacity (total) |
L |
200 |
Capacity (primary) |
L |
120 |
Capacity (domestic hot water) |
L |
80 |
Capacity expansion tank(s) |
L |
- |
Chimney: Max pressure drop in flue pipe |
Pa |
130 |
Chimney: max length of concentric flue pipe |
m |
20 |
Chimney connection |
Ømm |
80/125 |
Connection - heating |
Ø" |
1 F |
Connection - DHW |
Ø" |
1 M |
Connection gas |
Ø" |
3/4 M |
Connection - safety valve |
Ø" |
1/2 M |
Max operating temperature |
°C |
87 |
Water pressure drop boiler at Δt = 20°C |
mbar |
3 |
Max service pressure heating (primary) |
bar |
3 |
Max service pressure (DHW) |
bar |
8,6 |
Height when tilted |
mm |
1855 |
Weight (empty) |
kg |
174 |
Heating characteristics
|
|
|
|
HeatMaster 25 C |
Pre-heating time from 10 to 80°C (Heat source: boiler) |
min |
27 |
Heating time from 10 to 90°C |
min |
40 |
Combustion
|
|
|
|
HeatMaster 25 C |
Input max (heating) HCV |
kW |
27,8 |
Input max (heating) LCV |
kW |
25 |
Combustion efficiency |
% |
97,5 |
Efficiency at 30% load (EN677) |
% |
109,0 |
Efficiency (max output) 80/60°C |
% |
98 |
Efficiency (min output) 80/60°C |
% |
98 |
Efficiency DHW mode ΔT 30K |
% |
99,2 |
CO emissions max output |
ppm |
27 |
CO emissions min output |
ppm |
6 |
Mass rate of combustion products (gas) |
kg/h |
42 |
NOx weighted (GCV) (EN15502) |
mg/kWh |
26,3 |
NOx class (EN15502) |
|
6 |
Nominal power DHW |
kW |
25 |
Output power max (80/60°C) |
kW |
24,3 |
Output power min (80/60°C) |
kW |
4,9 |
Gas flow rate (min output) |
m³/h |
0,5 |
Domestic hot water performance
|
|
|
|
HeatMaster 25 C |
Peak flow at 40°C |
L/10’ |
233,5 |
Peak flow 1st hour at 40°C |
L/60’ |
748 |
Continuous flow at 40°C |
L/h |
617 |
Peak flow at 60°C |
L/10’ |
145 |
Peak flow 1st hour at 60°C |
L/60’ |
478 |
Continuous flow at 60°C |
L/h |
400 |
Electrical Characteristics
|
|
|
|
HeatMaster 25 C |
Voltage |
V |
230 |
Frequency |
Hz |
50 |
Protection IP |
|
20 |
Electrical consumption |
W |
95 |
Electrical power requirements |
A |
0,8 |
Eco Design Fields
|
|
|
|
HeatMaster 25 C |
Space heating energy efficiency class |
|
A |
Seasonal space heating efficiency (35°C) |
% |
93 |
Declared load profile |
|
XXL |
Water heating energy efficiency class |
|
B |
Water heating energy efficiency [ηwh] (EU 814/2013 Art 2 (15) Ann.IV-3) |
% |
74 |
Sound power level indoors LWA |
dB |
60 |
Energy Label |
|
|
Product Fiche |
|
|
Cookies and Privacy
This website use cookies to ensure you get the best user experience on our website.
Cookie Settings