Gas Solenoid Valves are used for safety and control of gas for shut-off in gas feed pipes Suitable for various gases, including Natural gas, Propane and LPG ¼” Inlet and outlet plugs for CPI switch, pressure gauge, connection to proving and interlock system. Operation and Installation Two-way, normally closed – energise to open. Rapid opening Mounting direct on pipeline more or less 90 degrees (max) from the the vertical access Technical Specification • Opening Time <1 second • Closing time <1 second • Max number of operations: 20 per minute • ¼” Inlet and Outlet plugs • Incorporating AISI 303 steel mesh filter • Cable entry gland PG11 Live, Neutral, Earth • Protection to IP54 • NBR based seal with a strong resistance to hydrocarbons (UNI 4916-74) • Bodies and flanges in diecast aluminium (5”, 6” and 8” in steel) • AISI 302 steel pressure spring • Chrome Fe 37 steel armature • Ambient temperature -15°C to 60°C • Coil temperature about 70°C Electric specification Supply Voltage • 230V (-15%+10%) 50-60Hz • 110V (-15%+10%) 50-60Hz • 24V (-15%+10%) 50-60Hz • 24VDC • 12VDC