Flexfiller 280D floor standing pressurisation unit 17394

Flexfiller 280D floor standing pressurisation unit 17394

Compact and totally enclosed digital pressurisation units with electronic pressure transducer and user-friendly microprocessor for use on sealed system in order to provide a minimum system pressure requirement.
Available in single or twin pump configuration.

The Flexfiller is a floor standing, high flow rate (<18 l/min) top-up pressurisation unit with 18 litre break tank.

Application:

• Commercial.
• Industrial.
• Residential.

System Volume (Guide): < 300,000 litres.

• For system volumes up to 300,000 litres.
• Break Tank: 18 litre break tank with type AB Air Gap Fluid Cat 5.
• MODBUS Communication output.
• System quick-fill mode.
• Password protection for parameter entry.
• Pressure settings in 0.1 bar increments.
• Service reminder option (12 months).
• Pump pulse option (2 second pulse if inactive for 60 days).
• Flood protection options. High flow applications (<18.0 l/min).
• Event logging for pump start, individual pump run hours counter, electrical interruption and common alarm.
• Volt free contacts for common fault, high pressure, low pressure, pump fault, pressure transducer fault.
• Electric pump, 230V 50Hz 1ph (110V 60Hz 1ph available upon request).
• Colour: Black (RAL 9005).