Flexfiller Standard 225D Twin Pump Floor Standing FC FILL 225D 17397
SKU
115406
£1,903.48
Overview
Flexfiller
Compact and totally enclosed digital pressurisation units with electronic pressure transducer and user-friendly microprocessor for use on sealed system in order to provide a minimum system pressure requirement. Available in single or twin pump configuration.
The Flexfiller is a floor standing, high flow rate (<18 l/min) top-up pressurisation unit with 18 litre break tank.
Attributes
Suitable for membrane pressure expansion tank
Suitable for compressor-controlled automatic expansion unit
Flexfiller Standard 225D Twin Pump Floor Standing FC FILL 225D 17397
Description
Compact and totally enclosed digital pressurisation units with electronic pressure transducer and user-friendly microprocessor for use on sealed system in order to provide a minimum system pressure requirement.
The Flexfiller is a floor standing, flow rate (up to 18 l/min) top-up pressurisation unit with 18 litre internal break tank. Ideal for Industrial, commercial or large domestic applications. Available in single or twin pump configuration.
Application: Commercial, Industrial and Residential. System Volume (Guide): < 300,000 litres.
Product Features:
For system volumes up to 300,000 litres.
Fluid Protection Category 5 (AB Weir Overflow).
System fill mode.
Onscreen Service Reminder - 12 Months.
Electric pump, 230V 50Hz 1ph (2160D: 415V 50Hz 3ph).
Event logging: Alarm activations, Pump Run counter (activations per pump), Cumulative run timer (hours per pump), Electrical interuption.
Volt free contacts: Common Alarm (N/C), High Pressure Alarm (N/O), Low Pressure Alarm (N/O), Sensor Health (N/O), Pump 1 Health (N/O), Pump 2 Health (N/O).
Operating Conditions: Maximum system temperature: 85 ºC.Maximum ambient temperature: 40 ºC.Relative humidity 95% non-condensing.Noise Rating Data: < 75 dBA. Factory fit options: Single or twin pump version.High water level.BACnet communication protocol in place of MODBUS connection. Certifications and Standards Applied: PED 2014/68/EU Sound Engineering Practice.IEE - Electrical Safety Guidance.EMC 2004/108/EC.BS 7074 Parts 1 to 3.Machinery Directive 95/16/EC.Electronic Components have been tested and comply with the EMC Directives.EN 61000-6-2: Generic Standards – Immunity standard for industrial environments.EN 61000-6-3: Generic Standards – Emission standard for residential, commercial and light industrial environment.CE marked components, where applicable.WRAS approved float valve to BS1212.IP54 (BS EN60529) rated controller. Material of Construction: Cabinet: Mild steel CR4.Float: WRAS Approved Torbeck Side Entry.Break Tank: WRAS Approved Polypropylene.Pump: PEDROLLO / ULKA (Unit dependant. See pump details for more information).Connection: Brass / Polypropylene.Pipework: Braided flexihose / EPDM.Finish: Powder coated.
